The ELP declicker is compatible with both the ELP Laser Turntable and conventional turntables.
No other hardware is required. Not even a computer.
Click/crackle sensitivity is continuously variable using a single rotary control. When the sensitivity is set to "minimum" there will be minimum noise reduction and negligible effect on the signal.
Bypass allows the user to leave the ELP declicker in the signal path with no noise reduction.
Bypass is easily switched on and off with a front-panel control.
Bypass operates in two modes:
Analog Mode: Analog output is connected directly to the analog input with no AD-DA conversion. There will be an audible "Glitch" when switching Bypass on or off in this mode.
Glitch-Free mode: The bypass is implemented by switching off the de-click process. The signal continues to pass through analog-digital-analog, but no processing is performed. There is no glitch when switching bypass on or off in this mode.
Analog RCA stereo inputs connect directly to phono preamplifier or ELP ELT-10 outputs
Analog RCA stereo outputs connect directly to line-level preamp or integrated amplifier
Digital S/PDIF coax or optical (TOSLINK) outputs connect directly to computer or DAT
Sample Rate: 44.1 kHz or 88.2 kHz, user selectable
Word length: 24-bit
Size: Approx. 220 x 44 x 150 mm (8.7 x 1.7 x 5.9 inches)