-
Yamaha RX-V659
Τελικά πήρα τον ενισχυτή που φαίνεται στον τίτλο. Τα ηχεία (Jamo S606 HCS) και τα χαρακτηριστικά τους τα είχα γράψει σε post προηγούμενου thread (AV receiver και ηχεία). Εκεί είχα ξεχάσει να αναφέρω ότι τα ηχεία έχουν εμπέδηση 6 Ohm. Το πρόβλημα λοιπόν είναι το εξής: Στο εγχειρίδιο χρήσης του ενισχυτή αναφέρεται ότι αν τα ηχεία είναι 6ωμα, ο ενισχυτής πρέπει να ρυθμιστεί σ' αυτή την αντίσταση. Αυτό η εταιρεία το συνιστά ανεπιφύλακτα. Όμως από τον reviewer του Audioholics Gene Della Sala για το συγκεκριμένο ενισχυτή διάβασα σχόλιο στο οποίο συμβουλεύει να αφήσουμε την εμπέδηση του ενισχυτή στα 8 Ohm, ανεξάρτητα από την εμπέδηση των ηχείων. Παραθέτω το σχόλιο αυτολεξεί (όλες οι επισημάνσεις είναι δικές μου):
Choosing the Speaker Impedance
Yamaha still ships their receivers with the dreaded impedance selector switch. Our advice as always is to use the "Minimum 8-ohms" setting regardless of the impedance of your speakers. See our editorial note below for further elaboration.
Editorial Note about the Impedance Selector Switch
I recommend the "Minimum 8-ohms" setting even for 4-ohm speakers of moderate efficiency ( > 89dB SPL). Yamaha includes a" 6-ohm" setting to satisfy UL heat dissipation requirements when driving 4-ohm loads, as well as easing consumer concerns about driving low impedance loads. These switches step down voltage feed to the power sections which can limit dynamics and overall fidelity. My advice is to keep the switch set to "Minimum 8-ohms" regardless of the impedance of your speakers and ensure proper ventilation of the Receiver. Using the 6 ohm setting will reduce power output to your speakers about 15-20% and thus cause higher frequency of amplifier clipping if driven too hard which can damage your speakers.
Το σχόλιο αυτό με ανησύχησε λίγο. Φοβάμαι δηλαδή μήπως κάνω καμιά ανοησία και κάψω ενισχυτή ή ηχεία,
Θα μου ήταν λοιπόν πολύτιμη η γνώμη των έμπειρων στελεχών του φόρουμ.
Ευχαριστώ και ελπίζω να μη σας κούρασα ιδιαίτερα.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules